You are here: Home » Products » PVC & CPVC Fume Exhaust (Duct) Pipe and Fittings » 90° Elbows
  Print This Page

PVC & CPVC (Belled End) 90° Elbows

PVC & CPVC Duct (Belled End) 90o Elbows

Conforming to ASTM-D-1784 Material Standard

Illustrations Nominal
Pipe Size
1 X 2		 Dimensions Approx.
Weight Pounds		 * Part
  Number
A B PVC CPVC

5 Piece
90 Deg. Elbow
CLR=1 1/2 X Diameter

 6 9 13 1/8 4.26 4.77 305-060-D
7 10 1/2 13 5/8 4.96 NA 305-070-D
8 12 13 1/2 6.58 7.37 305-080-D
9 13 1/2 16 1/4 7.69 NA 305-090-D
10 15 17 5/8 9.48 10.62 305-100-D
11 16 1/2 18 7/8 10.68 NA 305-110-D
12 18 20 1/8 12.76 14.29 305-120-D
14 21 22 5/8 15.21 17.03 305-140-D
16 24 25 3/8 19.72 22.09 305-160-D
18 17 27 7/8 25.52 28.58 305-180-D
20 30 30 1/2 34.18 38.29 305-200-D
24 36 35 3/4 54.18 60.68 305-240-D
 

Illustrations Normal
Pipe Size
1 X 2		 Dimensions Approx.
Weight Pounds		 * Part
  Number
A B PVC CPVC

3 Piece
90 Deg. Elbow
CLR=1 X Diameter

 6 6 9 7/16 3.45 4.57 306-060-D
7 7 10 1/8 4.09 NA 306-070-D
8 8 11 5.12 5.74 306-080-D
9 9 11 3/4 5.90 NA 306-090-D
10 10 12 1/2 7.23 8.10 306-100-D
11 11 13 1/4 8.01 NA 306-110-D
12 12 14 1/8 9.52 10.67 306-120-D
14 14 15 5/8 11.35 12.71 306-140-D
16 16 17 1/8 14.14 15.83 306-160-D
18 18 18 3/4 18.48 20.70 306-180-D
20 20 20 3/8 24.00 26.87 306-200-D
24 24 23 1/2 37.50 42.00 306-240-D

Note:  These fittings are recommended for use with PVC / CPVC DUCT only.

For sizes, materials and configurations not shown above please contact

United Equipment & Fabricators

Phone:  (973) 242-2737

NA = Not Available

* The part numbers listed above are for PVC, for CPVC change "D" to "C"

Our ongoing commitment to product improvement may result in some dimensional variations.  No representation, guarantees or warranties of any kind are made as to suitability for particular application or results to be obtained therefrom.


^ Top

Previous page: PVC & CPVC (Belled End) 45° Elbows
Next page: PVC & CPVC (Belled End) Blast Gates